Installhdlm Utility For Installing Hdlm; Format; Parameters; Editing An Installation-Information Settings File - Hitachi XP P9500 User Manual

7. Utility Reference

7.10 installhdlm Utility for Installing HDLM

You can use this utility to perform a new installation, upgrade installation, or
re-installation of HDLM.
The utility can also be used to perform an unattended installation. An unattended
installation enables a user to install HDLM without entering information. Before you
perform an unattended installation, you must define the information required for
installation in the installation-information settings file.
For details about how to perform an unattended installation, see 3.6 Installing HDLM.

7.10.1 Format

mount-point-of-HDLM-installation-media
installation-information-settings-file-name

7.10.2 Parameters

-v
Displays the version of HDLM to be installed.
-h
Displays the format of the
installation-information-settings-file-name
-f
Specify this parameter when performing an unattended installation of HDLM.
Specify the installation-information settings file for this parameter.
For details about the installation-information settings file, see 7.10.3 Editing an
Installation-Information Settings File.

7.10.3 Editing an Installation-Information Settings File

This section describes how to edit the installation-information settings file.
(1) How to Edit an Installation-Information Settings File
Keep the following in mind when you edit an installation-information settings file:
• Enter keys in the order of the keys defined in the sample file
sample_installhdlm.conf
• Enter one key and one setting per line.
• Enter values in the key-name
• To enter a comment line, specify a hash mark (
• If a specified value is not allowed for the key setting, the KAPL09212-E and
514
/installhdlm [-v | -h | [-f
]
utility.
installhdlm
.
setting format.
=
) at the beginning of the line.
#