Requirements For Outputting Audit Log Data - Hitachi XP P9500 User Manual

Category
#1
The severity levels are as follows:
3: Error, 4: Warning, 6: Informational
#2
If you use Ctrl + C to cancel the
information, audit log data indicating that the
will not be output.

2.12.2 Requirements for Outputting Audit Log Data

HDLM can output audit log data when all of the following conditions are satisfied:
• The
syslog
• The output of audit log data has been enabled by using the HDLM command's
operation.
set
However, audit log data might still be output regardless of the above conditions if, for
example, an HDLM utility is executed from external media.
#:
The following audit log data is output:
• Categories:
• Severity: 6 (Critical, Error, Warning, or Informational)
• Destination: syslog (facility value:
Notes:
Explanation
Processing of the
dlmsetopt -inqr
command was successful.
Processing of the
dlmsetopt -inqr
command failed.
Processing of the
dlmupdatesysinit
command was successful.
Processing of the
dlmupdatesysinit
command failed.
DLMgetras
daemon is active.
,
StartStop Authentication
Audit event Severity
#1
6
3
6
3
utility for collecting HDLM error
utility has terminated
DLMgetras
#
, and
ConfigurationAccess
)
user
2. HDLM Functions
Message
ID
KAPL150
56-I
KAPL150
57-E
KAPL150
58-I
KAPL150
59-E
49