Kapl10001 To Kapl11000 - Hitachi XP P9500 User Manual

8. Messages

8.10 KAPL10001 to KAPL11000

KAPL10001-W
No parameter has been specified.
Details
No directory to which the collected information will be output has been specified.
Action
Check the parameters of the
information, and then retry. For details on the
7.2 DLMgetras Utility for Collecting HDLM Error Information.
KAPL10002-W
Too many parameters have been specified.
Details
Four or more parameters have been specified.
Action
Check the parameters of the
information, and then retry. For details on the
7.2 DLMgetras Utility for Collecting HDLM Error Information.
KAPL10003-W
The first parameter has not been set to a directory. Value = aa...aa
Details
A value which is not a directory name is set for the first parameter. The first
parameter must be a directory to which collected information will be output.
aa...aa: First parameter
Action
Check the parameters of the
information, and then retry. For details on the
7.2 DLMgetras Utility for Collecting HDLM Error Information.
KAPL10004-W
The parameter contains an incorrect value. Value = aa...aa
Details
The first parameter must be a directory. The second parameter must be
aa...aa: Invalid parameter
602
utility for collecting HDLM error
DLMgetras
DLMgetras
utility for collecting HDLM error
DLMgetras
DLMgetras
utility for collecting HDLM error
DLMgetras
DLMgetras
utility, see
utility, see
utility, see
.
-f