File System Settings; Application Program Settings; Uninstalling Hitachi Network Objectplaza Trace Library (Hntrlib2) - Hitachi XP P9500 User Manual

File System Settings

For the file systems of the LUs that were managed by HDLM, specify settings
that allow the Solaris sd or ssd driver to be mounted or specify settings that
allow volume manager's volumes to be mounted after setup is performed
again.
After uninstalling HDLM, the ZFS file system that was exported before the
uninstallation can be imported for use.

Application Program Settings

For the application programs that were using HDLM devices, specify the
device file of the Solaris sd or ssd driver.

Uninstalling Hitachi Network Objectplaza Trace Library (HNTRLib2)

When you uninstall HDLM, if the KAPL09019-E or KAPL09020-E message is
output, follow the procedure below to uninstall HNTRLib2.
To uninstall HNTRLib2:
1 Log in to Solaris as a user with root permissions.
.
2 Execute the following command to unregister the name of the bundled
.
program products:
# /opt/hitachi/HNTRLib2/etc/hntr2cancel "Hitachi Dynamic Link
Manager"
3 Execute the following command:
.
# /opt/hitachi/HNTRLib2/etc/hntr2setup
The HNTRLib2 setup menu will be displayed.
4 From the setup menu, select 9.
.
HNTRLib2 will be uninstalled.
If HNTRLib2 is not being used by any other programs:
If HNTRLib2 is being used by another program:
3-180
HNTRLib2 will be uninstalled normally, and the following message will
be displayed.
Unsetup is complete.
HNTRLib2 will not be uninstalled, and the following message will be
displayed.
Because a bundle PP name is registered,
I did not do the Uninstall.
If HNTRLib2 was not uninstalled, execute the following command to
check what programs are using it:
# /opt/hitachi/HNTRLib2/etc/hntr2getname
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))