Return Codes For Hitachi Command Suite Common Agent Component - Hitachi XP P9500 User Manual

Hitachi dynamic link manager software user's guide for linux (6.x) (hit5203-96004, october 2011)

Hide thumbs Also See for XP P9500:

Table of Contents

8.15 Return Codes for Hitachi Command Suite Common Agent

When an operation requested of HDLM from Global Link Manager terminates

abnormally, or terminates normally with a warning, HDLM outputs one of the return

codes described below.

There is no path on which the operation can be performed.

Refresh the host information, check the path status, and then perform the

operation again.

No path was detected.

Check whether a path between the host and the storage system is connected. If a

path is connected, check whether HDLM is configured correctly.

Memory required for HDLM internal processing could not be allocated.

Terminate unnecessary applications to increase free memory, or restart the host.

Remove the error in the path, and then retry.

The target path of the offline operation is the last, remaining path connected to the

device and therefore, cannot be placed in the offline status.

path cannot be placed

Chapters

Table of Contents

Dynamic link manager