Creating An Hdlm Environment - Hitachi XP P9500 User Manual

Chapter

3. Creating an HDLM Environment

This chapter explains the procedure for setting up an HDLM environment and the
procedure for canceling the environment settings.
Make sure that HDLM installation and function setup has been performed. Set up
volume groups and cluster software according to the environment you are using.
3.1 HDLM System Requirements
3.2 Flow for Creating an HDLM Environment
3.3 HDLM Installation Types
3.4 Knowledge Required Before You Install HDLM
3.5 Notes on Creating an HDLM Environment
3.6 Installing HDLM
3.7 Installing HDLM for Managing Boot Disks
3.8 Settings for LUKS
3.9 Settings for md Devices
3.10 Settings for LVM2
3.11 Settings for Xen
3.12 Settings for KVM
3.13 Settings for Heartbeat
3.14 Settings for Oracle RAC
3.15 Settings for the RHCM
3.16 Settings for VCS
3.17 Checking the Path Configuration
3.18 Setting Up HDLM
3.19 The Process-specific-trace Information File
3.20 Creating a Character-Type Device File for an HDLM Device
3.21 Creating File Systems for HDLM (When Volume Management Software Is
Not Used)
3.22 Settings for Automatic Mounting
3.23 Canceling the Settings for HDLM
57