Hitachi XP P9500 User Manual page 480

6. Command Reference
• Summary displayed: The user specifies the
parameter.
Table 6-17: LU Information
Displayed item
No summary
displayed
Product
SerialNumber S/N
LUs
iLU
#1
SLPR SLPR
#1
HDevName
HDevName
456
Summary
displayed
Model ID of the storage system
Serial number of the storage system
Total number of LUs managed by HDLM among the LUs in the
storage system
LU number in the storage system.
This number combined with the storage system name (shown in
) identifies the LU that is accessed by a path.
DskName
• For the Lightning 9900 series, Lightning 9900V series, Hitachi
NSC55, Hitachi Universal Storage Platform 100, Hitachi
Universal Storage Platform 600, and Hitachi Universal Storage
Platform 1100, indicated by a hexadecimal number. The first
two characters of
CU, and the last two characters are the internal LU number
within the CU.
• For HP XP10000/HP XP12000, P9500, and SVS, indicated by
a hexadecimal number. The first three characters of
CU number, and the last two characters are the internal LU
number within the CU.The first character of a CU number is 0.
• For the Thunder 9500V series, and Hitachi AMS2000/AMS/
WMS/SMS series, indicated by a decimal number. The entire
value of
system. You can identify an actual LU by referencing
the storage system management program.
• For Universal Storage Platform V/VM and Hitachi Virtual
Storage Platform, indicated by a hexadecimal number. The
first two characters of
(Disk Controller), the middle two numbers are the CU number,
and the last two characters are the internal LU number within
the CU.
#2 The number of the SLPR to which an LU belongs, indicated by a
number from 0 to 31. A hyphen (
logical partition functionality for the storage system for the target
LU is not supported.
Host device name.
The name of the logical device file (minus the partition number),
dev/sddlm
For details on logical device files for HDLM devices, see
2.6 Logical Device Files for HDLM Devices.
parameter or
-lu -c
Description
are the internal CU number within the
iLU
is the internal LU number within the storage
iLU
are the number of the logical DKC
iLU
) is displayed if the storage
-
[aa-pap], for the HDLM device.
-lu -c -item
are the
iLU
from
iLU
/