Hitachi XP P9500 User Manual page 203

root (hd0,0)
kernel /vmlinuz-2.6.16.60-0.54.5-smp root=/dev/VG/
root vga=0x31a \
resume=/dev/VG/swap splash=silent showopts
multipath=off
initrd /initrd-2.6.16.60-0.54.5-smp
multipath=off
3. Check the definition in the
Check whether
LABEL
xxxxx,
LABEL= LABEL
For Red Hat Enterprise Linux 6, also check whether the block device names
( names) starting with
udev
underlined parts:
UUID=55574d05-07dc-4c94-a585-5599c284d79b /
defaults
UUID=33ef8ca1-595a-4fbf-8567-76f70760d743 /boot ext4
defaults
:
:
If the OS is SUSE LINUX Enterprise Server 10 or SUSE LINUX Enterprise
Server 11, also check whether the device names (
directory are specified as shown in the following underlined parts:
dev/disk
/dev/disk/by-id/scsi-1HITACHI_D60H03750019-part2 swap swap
defaults
/dev/disk/by-id/scsi-1HITACHI_D60H03750019-part3 /
acl,user_xattr 1 1
:
:
4. Check the definition in the boot loader configuration file.
Check whether
LABEL
file. The following shows examples for
• When GRUB is used as the boot loader with non-Xen kernels:
For details on kernels supported by HDLM, see 3.1.1 Hosts and OSs
Supported by HDLM.
is set in the underlined section.
file.
/etc/fstab
is used in the
/etc/fstab
is being used.
are specified as shown in the following
UUID=
1 1
1 2
0 0
is used in the definition in the boot loader configuration
LABEL
3. Creating an HDLM Environment
file. If the file contains
ext4
names) starting with the
udev
.
/
ext3
179