Hitachi XP P9500 User Manual page 229

/dev/sddlmaa1
This example assumes that IA32 uses
that uses as the boot loader, the mount point is displayed as
ELILO
instead of in the line where
/boot
displayed as
vfat
16. Edit the boot loader configuration file so that the OS will start with HDLM
specified.
Edit the boot loader configuration file as shown in Figure 3-12: Example of
Editing /etc/grub.conf file, Figure 3-13: Example of Editing /boot/grub/menu.lst
file (When using a kernel that supports Xen), and Figure 3-14: Example of
Editing /etc/elilo.conf file.
If you are using SUSE LINUX Enterprise Server 10 or SUSE LINUX Enterprise
Server 11, check the
file.
grub.conf
The detailed procedure is explained in steps 17 to 22.
Figure 3-12: Example of Editing /etc/grub.conf file, Figure 3-13: Example of
Editing /boot/grub/menu.lst file (When using a kernel that supports Xen), and
Figure 3-14: Example of Editing /etc/elilo.conf file show examples of editing the
configuration file.
Figure 3-12: Example of Editing /etc/grub.conf file
Edit the shaded portion.
/boot
:
:
GRUB
/boot
instead of .
ext3
/boot/grub/menu.lst
3. Creating an HDLM Environment
ext3 defaults
as the boot loader. When you use IPF
is coded, and the file system type is
file instead of the
/etc/
1 2
/boot/efi
205