Uninstalling Hitachi Network Objectplaza Trace Library (Hntrlib2) - Hitachi XP P9500 User Manual

Execute the following command and make sure that 0 is displayed for
Used for sddlmfdrv:
# /sbin/lsmod
Module
sddlmfdrv
If a value other than 0 is displayed for Used, perform the operation
described in
then perform steps 2 and 3 in
the HDLM devices can no longer be used.
21 Uninstall HDLM.
.
To uninstall HDLM, execute the following command:
# rpm -e HDLM
22 Make sure that the uninstallation has been completed.
.
You must execute the following command to make sure that the
uninstallation has been completed. The following information is output.
# rpm -qi HDLM
package HDLM is not installed

Uninstalling Hitachi Network Objectplaza Trace Library (HNTRLib2)

When you uninstall HDLM, if the KAPL09019-E or KAPL09020-E message is
output, follow the directions below to uninstall HNTRLib2.
To uninstall HNTRLib2:
1 Log in to Linux as the root user.
.
2 Execute the following command to unregister the name of the bundled
.
program products.
# /opt/hitachi/HNTRLib2/etc/hntr2cancel "Hitachi Dynamic Link
Manager"
3 Execute the following command.
.
# /opt/hitachi/HNTRLib2/etc/hntr2setup
The HNTRLib2 setup menu will appear.
4 From the Setup menu, select 9.
.
HNTRLib2 will be uninstalled.
If HNTRLib2 is not being used by any other programs:
3-226
:
:
Operations on HDLM-Managed Devices on page
HNTRLib2 will be uninstalled normally, and the following message will
appear.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Size Used by
254092 0
Uninstalling HDLM on page 3-217
3-199, and
so that