Hitachi XP P9500 User Manual page 552

8. Messages
Specify the parameter value, and then retry.
KAPL01009-W
A parameter value is invalid. Operation name = aa...aa, parameter
= bb...bb, parameter value = cc...cc, Valid value = dd...dd
Details
aa...aa:
offline
bb...bb: Parameter name
cc...cc: Specified parameter value
dd...dd: Specifiable parameter value range
Action
Specify a correct value for the parameter, and then retry.
KAPL01012-E
Could not connect the HDLM manager. Operation name = aa...aa
Details
In the
view -sys -sfunc
HDLM manager but the manager cannot be accessed.
aa...aa:
view
Action
Execute the
the HDLM manager has started. Start the HDLM manager if it has not started, and
then retry the HDLM command. For details on the
(Displays Information).
KAPL01013-E
An error occurred in internal processing of the HDLM command.
Operation name = aa...aa details = bb...bb
Details
An error unrelated to a user operation occurred during command processing.
aa...aa:
clear
bb...bb: The name of the function and processing on which the error occurred
Action
Execute the
contact your HDLM vendor or the maintenance company if there is a maintenance
contract for HDLM. For details on the
Utility for Collecting HDLM Error Information.
528
, , , or
online set
operation, information must be collected from the
operation of the HDLM command (
view
, ,
offline online
utility for collecting HDLM error information, and then
DLMgetras
view
dlnkmgr
operation, see 6.7 view
view
, , or
set view
utility, see 7.2 DLMgetras
DLMgetras
) to check whether