Hitachi XP P9500 User Manual page 650

8. Messages
device, and re-execute the
utility, see 7.3 dlmcfgmgr Utility for Managing the HDLM Configuration.
KAPL10355-E
An attempt to unregister partition information for the HDLM
device(s) failed. Stop the application using the HDLM device,
and unmount the mounting HDLM device, and then execute the
dlmcfgmgr utility again.
Details
An attempt to execute the HDLM-configuration definition utility (
failed because registration of the partition information on a HDLM device could
not be released.
Action
Stop the application for using HDLM device, and unmount the mounting HDLM
device, and re-execute the
utility, see 7.3 dlmcfgmgr Utility for Managing the HDLM Configuration.
KAPL10356-E
An unused major number could not be released. Major number =
aa...aa. Refer to the Messages section of the HDLM User's Guide for
instructions to correct this problem.
Details
An attempt to release an intact major number (aa...aa) has failed.
aa...aa: Major number (decimal number)
Action
Restart the host. If the host does not recover, execute the
collecting HDLM error information, and then contact your HDLM vendor or the
maintenance company if there is a maintenance contract for HDLM.
For details on the
HDLM Error Information.
KAPL10357-E
The maximum number of HDLM device files has been reached. Maximum
number = aa...aa. Modify the configuration of the HDLM device to
reduce the number of HDLM devices used, and then execute the
dlmcfgmgr utility again.
Details
An attempt to execute the HDLM-configuration definition utility (
failed because the maximum number of logical device files has been created.
aa...aa: Maximum number of created logical device files of an HDLM device
626
utility. For details on the
dlmcfgmgr
utility. For details on the
dlmcfgmgr
utility, see 7.2 DLMgetras Utility for Collecting
DLMgetras
dlmcfgmgr
)
dlmcfgmgr
dlmcfgmgr
utility for
DLMgetras
)
dlmcfgmgr