Hitachi XP P9500 User Manual page 351

To uninstall HNTRLib2:
1. Log in to Linux as the root user.
2. Execute the following command to unregister the name of the bundled program
products.
# /opt/hitachi/HNTRLib2/etc/hntr2cancel "Hitachi Dynamic
Link Manager"
3. Execute the following command.
# /opt/hitachi/HNTRLib2/etc/hntr2setup
The HNTRLib2 setup menu will appear.
4. From the Setup menu, select 9.
HNTRLib2 will be uninstalled.
If HNTRLib2 is not being used by any other programs:
HNTRLib2 will be uninstalled normally, and the following message will
appear.
Unsetup is complete.
If HNTRLib2 is being used by another program:
HNTRLib2 will not be uninstalled, and the following message will appear.
Because a bundle PP name is registered,
I did not do the Uninstall.
If HNTRLib2 was not uninstalled, execute the following command to check
if any programs are using it.
# /opt/hitachi/HNTRLib2/etc/hntr2getname
If you are unable to complete uninstallation even when no other programs are
using HNTRLib2, contact your HDLM vendor, or, if you have a maintenance
contract for HDLM, contact your maintenance company.
Note
If the log output directory set in HNTRLib2 was not the default directory, the log
files will not be deleted during uninstallation. In this case, delete these files after
uninstallation.
3. Creating an HDLM Environment
327