portLogResize
Resizes the port log to include a specified number of entries.
Synopsis
portlogresize num_entries
Description
Use this command to resize the port log to include a specified number of entries. If the specified
number of entries is less than the already configured port log size, there is no change.
Note
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands
This command has the following operand:
num_entries
Examples
To resize the portlog:
See Also
portLogConfigShow
Fabric OS Command Reference
53-1001764-01
Specifies the number of port log entries. The valid range of values is 32,768
to 13,1072 for the Brocade 7500, 7600, Encryption Switch, DCX, and
DCX-4S. For all other platforms, the range is 16,384 to 32,768.
switch:admin> portlogresize 17288
2
portLogResize
721