Portlogpdisc - Brocade Communications Systems SN3000B Command Reference Manual

portLogPdisc

Sets or clears the debug_pdisc_flag.
SYNOPSIS
portlogpdisc 0 | 1
DESCRIPTION
Use this command to set or clear the debug_pdisc_flag. This command is part of the environmental
monitor. A setting of 1 enables logging of Port Discovery parameters. The PDISC log is disabled by
default.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operand:
0 |1
EXAMPLES
To set the debug_pdisc_flag:
SEE ALSO
None
Fabric OS Command Reference
53-1001764-01
Specify 0 to clear or 1 to set the debug_pdisc_flag. The default is 0.
switch:admin> portlogpdisc 1
PDISC log setting = 1
2
portLogPdisc
741