Gate Solenoid Removal - Lexmark W820 - Optra B/W Laser Printer Service Manual

Gate Solenoid Removal

Removal
1.
2.
3.
Replacement
1.
2.
3.
4-140
Service Manual
Remove the Cover-Top, Front and Cover-Top, Rear.
Unplug the connector (CN 16) of the Harness Motor from the Gate Solenoid.
Remove two screws that secure to the frame on the front of the Finisher from the
Gate Solenoid, and remove the Gate Solenoid.
Align the Gate Solenoid with the mounting position so that the actuator of the Gate
Solenoid comes to the right of the actuator of the Gate Solenoid, and then secure it
with two screws.
Plug the connector (CN 16) of the Harness Motor to the Gate Solenoid.
Mount the Cover-Top, Front and Cover-Top, Rear.
4025-Finisher