Sensor Dust-Assembly Removal - Lexmark W820 - Optra B/W Laser Printer Service Manual

Sensor Dust-Assembly Removal

Removal
1.
Remove the Cover-Jogging.
2.
Remove the Cover-Top, Front and Cover-Top, Rear.
3.
Remove the Cover-Rear.
4.
Unplug the connector (P/J 18) of the Harness H-Tra from the Sensor Dust Assembly.
5.
Remove the screw that secures to the Finisher from the Sensor Dust Assembly, and
remove the Sensor Dust Assembly.
Replacement
1.
Align the Sensor Dust Assembly with the mounting position, and secure it with a
screw.
2.
Plug the connector (P/J 18) of the Harness H-Tra to the Sensor Dust Assembly.
3.
Mount the Cover-Rear.
4.
Mount the Cover-Top, Front and Cover-Top, Rear.
5.
Mount the Cover-Jogging.
4025-Finisher
Removal and Replacement Procedures
4-61