Cap-End Removal - Lexmark W820 - Optra B/W Laser Printer Service Manual

Cap-End Removal

Removal
1.
2.
Replacement
1.
2.
4-38
Service Manual
Insert a small screwdriver between the Cap-End and Frame Post on the front side,
and pull off the Cap-End.
For the rear side, perform the above step in the same manner.
Align the Cap-End with the mounting position in the Frame Post on the front side,
and mount the Cap-End.
For the rear side, perform the above step in the same manner.
4025-Finisher