Stepping Motor, Upper Tray Removal - Lexmark W820 - Optra B/W Laser Printer Service Manual

Stepping Motor, Upper Tray Removal

Removal
1.
Remove the Sensor Assembly.
2.
Remove the Cover-Top, Front and Cover-Top, Rear.
3.
Remove the Exit Assembly.
4.
Remove the Exit Sensor.
5.
Remove the Gear Kit.
6.
Unplug the connector (CN 12) of the Harness Motor from the Stepping Motor, Upper
Tray.
7.
Remove two screws that secure the Stepping Motor, Upper Tray to the Finisher, and
remove the Stepping Motor, Upper Tray.
Replacement
1.
Align the Stepping Motor, Upper Tray with the mounting position in the Finisher, and
secure them with two screws.
2.
Plug the connector (CN 12) of the Harness Motor to the Stepping Motor, Upper Tray.
3.
Mount the Gear Kit.
4.
Mount the Exit Sensor.
5.
Mount the Exit Assembly.
6.
Mount the Cover-Top, Front and Cover-Top, Rear.
7.
Mount the Sensor Assembly.
4025-Finisher
Removal and Replacement Procedures
4-149