Sensor, Input Path Removal - Lexmark W820 - Optra B/W Laser Printer Service Manual

Sensor, Input Path Removal

Removal
1.
Remove the Cover-Jogging.
2.
Remove the Cover-Top, Front and Cover-Top, Rear.
3.
Remove the Cover Top Left.
4.
Remove the Top Center Cover Assembly.
5.
Unplug the connector (P/J 1) of the Harness Sensor from the Sensor, Input Path.
6.
Remove the screw that secures the Bracket-Sensor, and lift up the Bracket-Sensor
together with the Sensor, Input Path and Clamp.
7.
Unhook the Sensor, Input Path at four places, and remove the Sensor, Input Path.
Replacement
1.
Align the Sensor, Input Path with the mounting position in the Bracket-Sensor, and
mount the Sensor, Input Path.
2.
Align the Bracket-Sensor, together with the Sensor, Input Path and Clamp, with the
mounting positions in the Finisher, and secure them with a screw.
3.
Plug the connector (P/J 1) of the Harness Sensor to the Sensor, Input Path.
4.
Mount the Top Center Cover Assembly.
5.
Mount the Cover Top Left.
6.
Mount the Cover-Top, Front and Cover-Top, Rear.
7.
Mount the Cover-Jogging.
4025-Finisher
Removal and Replacement Procedures
4-41