Motor Assembly-Mp4 Removal - Lexmark W820 - Optra B/W Laser Printer Service Manual

Service manual
Hide thumbs Also See for W820 - Optra B/W Laser Printer:
Table of Contents

Advertisement

Motor Assembly-MP4 Removal

Removal
1.
Remove the Cover-Jogging.
2.
Remove the Cover-Top, Front.
3.
Unplug the connector (CN 4) of the Harness Motor from the Motor Assembly-MP4.
4.
Remove the screws that secure to the Finisher from the Motor Assembly-MP4, and
remove the Motor Assembly-MP4 with the Sensor, Exit Roller Open/Close Home
Position.
5.
Unhook the Sensor, Exit Roller Open/Close Home Position at three places, and
remove the Sensor, Exit Roller Open/Close Home Position from the Motor
Assembly-MP4.
Replacement
1.
Align the Sensor, Exit Roller Open/Close Home Position with the mounting positions
in the Motor Assembly-MP4, and secure it.
2.
Align the Motor Assembly-MP4 with the mounting position in the Finisher, and
secure it with the screws.
3.
Plug the connector (CN 4) of the Harness Motor to the Motor Assembly-MP4.
4.
Mount the Cover-Top, Front.
5.
Mount the Cover-Jogging.
4025-Finisher
Removal and Replacement Procedures
4-87

Advertisement

Table of Contents
loading

This manual is also suitable for:

W820 finisher 4025-xxx

Table of Contents