Cover Top H-Tra Assembly Removal - Lexmark W820 - Optra B/W Laser Printer Service Manual

Cover Top H-Tra Assembly Removal

Removal
1.
Insert a flat-tip screwdriver between the cover on the front of the H-Tra and the Cover
Assembly Open, and deflect the cover on the front of the H-Tra to release the
bearing on the front of the Cover Assembly Open from the shaft on the front of the H-
Tra.
2.
Remove the Cover Top H-Tra Assembly in the front diagonal upward direction.
Replacement
1.
Insert the shaft on the rear of the Cover Top H-Tra Assembly into the hole on the rear
of the H-Tra.
2.
Deflecting the cover on the front of the H-Tra, and insert the shaft on the front of the
H-Tra into the hole on the front of the Cover Top H-Tra Assembly.
4025-Finisher
Removal and Replacement Procedures
4-13