Lexmark W820 - Optra B/W Laser Printer Service Manual page 233

Removal
1.
Remove the Cover-Jogging.
2.
Remove the Tray-Lower.
3.
Remove the Cover-Top, Front and Cover-Top, Rear.
4.
Remove the Cover-Rear.
5.
Remove the Cover-Open, Front, Cover-Front and Kit Stud Cover.
6.
Remove the Right Cover.
7.
Remove the Latch Assembly and Switch Docking.
8.
Remove the Inner Cover.
9.
Unplug the connector (CN 11) of the Harness DC from the Motor Assembly-MD11.
10.
Remove the screws that secure the Drive Assembly-ELEV, and remove the Drive
Assembly-ELEV.
11.
Remove the screws that secure the Drive Assembly-ELEV, and remove the Motor
Assembly-MD11.
Replacement
1.
Align the Motor Assembly-MD11 with the mounting position in the Drive Assembly-
ELEV, and secure it with the screws.
2.
Align the Motor Assembly-MD11 and Drive Assembly-ELEV with the stay position in
the Finisher, and secure with the screws.
3.
Plug the connector (CN 11) of the Harness DC to the Motor Assembly-MD11.
4.
Mount the Inner Cover.
5.
Mount the Latch Assembly and Switch Docking.
6.
Mount the Right Cover.
7.
Mount the Cover-Open, Front, Cover-Front and Kit Stud Cover.
8.
Mount the Cover-Rear.
9.
Mount the Cover-Top, Front and Cover-Top, Rear.
10.
Mount the Tray-Lower.
11.
Mount the Cover-Jogging.
4025-Finisher
Removal and Replacement Procedures
4-125