Caster Assembly Removal - Lexmark W820 - Optra B/W Laser Printer Service Manual

Caster Assembly Removal

Removal
1.
Place several-ply cardboards or newspapers on the floor, and carefully tumble the
Finisher from the left side.
2.
Remove four screws that secure to the Frame Post from the Caster Assembly on the
front side, and remove the Caster Assembly on the front side.
3.
For the rear side, perform the above step in the same manner.
Replacement
1.
Align the Caster Assembly with the mounting position in the front side of the Frame
Post, and secure it with four screws.
2.
For the rear side, perform the above step in the same manner.
3.
Erect the Finisher carefully.
4025-Finisher
Removal and Replacement Procedures
4-39