Motor Removal - Lexmark W820 - Optra B/W Laser Printer Service Manual

Motor Removal

Removal
1.
2.
3.
4.
Replacement
1.
2.
3.
4.
4-84
Service Manual
Remove the Cover-Top, Front.
Remove the Cover-Open, Front, Cover-Front and Kit Stud Cover.
Unplug the connector (CN 3) of the Harness Motor from the Motor.
Remove the screws that secure to the Finisher from the Motor, and remove the
Motor.
Align the Motor with the mounting position, and secure it with the screws.
Plug the connector (CN 3) of the Harness Motor to the Motor.
Mount the Cover-Open, Front, Cover-Front and Kit Stud Cover.
Mount the Cover-Top, Front.
4025-Finisher