Top Cover Interlock Switch Removal - Lexmark W820 - Optra B/W Laser Printer Service Manual

Top Cover Interlock Switch Removal

Removal
1.
Remove the Cover-Top, Front and Cover-Top, Rear.
2.
Unplug the connector (S 3-1) of the Harness Motor from the Top Cover Interlock
Switch.
3.
Remove the screw that secures to the frame of the Finisher from the Top Cover
Interlock Switch, and remove the Top Cover Interlock Switch.
Replacement
1.
Align the Top Cover Interlock Switch with the mounting position in the frame on the
rear of the Finisher, and secure it with a screw.
2.
Plug the connector (S 3-1) of the Harness Motor to the Top Cover Interlock Switch.
3.
Mount the Cover-Top, Front and Cover-Top, Rear.
4025-Finisher
Removal and Replacement Procedures
4-139