Kit Drive Assembly Removal
Removal
1.
2.
3.
4.
5.
6.
7.
8.
4-46
Service Manual
Remove the Cover-Jogging.
Remove the Cover-Top, Front and Cover-Top, Rear.
Remove the Cover-Rear.
Unclamp the harness at six places on the Drive Assembly.
Remove the E-ring that secures two Gear and Gear to the Roll Assembly-REGI.
Remove two screws that secure to the Finisher from the Gear and Belt Assembly,
and remove the Gear and Belt Assembly together with the Gear.
Remove the E-ring that secures the Flange and Gear to the shaft of the Finisher.
Remove three screws that secure to the Finisher from the Drive Assembly, and
remove the Drive Assembly together with the Flange, Gear, Gear.
4025-Finisher