23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
4-96
Service Manual
Plug the connector (CN 8) of the Harness Motor to the Motor Assembly-MP8.
(Figure 2)
Mount the Latch Assembly and Switch Docking.
Align the Cover Upper Left Assembly, with the mounting position in the frame of the
Finisher, and secure it with six screws. (Figure 1)
Mount the Inner Cover.
Mount the Stapler Assembly.
Mount the Cover-Open, Front, Cover-Front and Kit Stud Cover.
Mount the Cover-Rear.
Mount the Cover-Top, Front and Cover-Top, Rear.
Mount the Cover-Jogging.
Mount the Bottle Assembly-Dust.
Mount the Cartridge.
4025-Finisher