Cover-Open, Cover-Front And Kit Stud Cover Removal - Lexmark W820 - Optra B/W Laser Printer Service Manual

Cover-Open, Cover-Front and Kit Stud Cover Removal

Removal
1.
2.
3.
4.
5.
6.
7.
8.
4-26
Service Manual
Remove the Cover-Jogging.
Open the Cover-Open, Front, and remove three screws that secure the Cover-Front
to the Finisher.
Remove four screws that secure the Cover-Front, and remove the Cover-Front
together with the Stud Cover and Cover-Open, Front.
From the back of the Cover-Front, face the notch of the upper Stud Cover toward the
back.
Pushing the latch of the upper Stud Cover, pull it off upward from the Cover-Open,
Front and Cover-Front.
From the back of the Cover-Front, face the notch of the lower Stud Cover toward the
back.
Pushing the latch of the lower Stud Cover, pull it off upward from the Cover-Open,
Front and Cover-Front.
Push the bearing of the Cover-Open, Front out of the square hole in the center of the
Cover-Front by lever action using a flat-tip screwdriver inserted between the bearing
of the Cover-Open, Front and the shaft of the Cover-Front.
4025-Finisher