Lexmark W820 - Optra B/W Laser Printer Service Manual page 186

Replacement
1.
2.
3.
4.
5.
6.
7.
8.
4-78
Service Manual
Insert the Bearing into the Motor Assembly-MP2.
Align the Motor Assembly-MP2, together with the Bearing, with the mounting
position in the Finisher so that the hole in the Bearing enters the shaft of the Frame
Assembly-Roll, Shift, and secure them with two screws.
Secure the Motor Assembly-MP2 to the Motor Assembly-MP4 with a screw.
Plug the connector (CN 2) of the Harness Motor to the Motor Assembly-MP2.
Clamp the harness with the Clamp.
Mount the Cover-Rear.
Mount the Cover-Top, Rear.
Mount the Cover-Jogging.
4025-Finisher