Sensor, Exit Roller Open/Close Home Position Removal
Removal
1.
Remove the Cover-Jogging and the Cover-Top, Rear.
2.
Remove the Motor Assembly MP2.
3.
Unplug the connector (CN 4) of the Harness Motor from the Motor Assembly-MP4.
4.
Unplug the connector (P/J 6) of the Harness Sensor from the Sensor, Exit Roller
Open/Close Home Position.
5.
Remove the screws that secure to the Finisher from the Motor Assembly-MP4, and
remove the Motor Assembly-MP4.
6.
Unhook the Sensor, Exit Roller Open/Close Home Position at three places, and
remove the Sensor, Exit Roller Open/Close Home Position from the Motor Assembly
MP4.
Replacement
1.
Align the Sensor, Exit Roller Open/Close Home Position with the mounting position
in the Motor Assembly-MP4 to secure it.
2.
Align the Motor Assembly-MP4, together with the Sensor, Exit Roller Open/Close
Home Position, with the mounting position in the Finisher, and secure them with the
screws.
3.
Plug the connector (P/J 6) of the Harness Sensor to the Sensor, Exit Roller Open/
Close Home Position.
4.
Plug the connector (CN 4) of the Harness Motor to the Motor Assembly-MP4.
5.
Mount the Motor Assembly-MP2.
6.
Mount the Cover-Top, Rear and the Cover-Jogging.
4025-Finisher
Removal and Replacement Procedures
4-81