Mechanical Drive Punch Unit Components
•
The Main Feed Motor supplies a driving force to the Punch Clutch, Fin input Roller
and Regi Roller. It also transmits a driving force to the entire H-Tra via the Transport
Gear 1.
•
The Punch Clutch transmits the driving force transmitted from the Punch Gear2 to
the Punch Shaft on the Punch Unit.
•
The Regi Roll Gear rotates the Regi Roller. It also transmits the driving force
transmitted from the Timing Belt 1 to the Punch Drive Belt.
•
The Punch Gear 1 transmits the driving force transmitted from the Punch Drive Belt
to the Punch Gear 2.
•
The Punch Gear 2 transmits the driving force transmitted from the Punch Drive 1 to
the Punch Clutch.
•
The Punch Drive Belt transmits the driving force transmitted from the Regi Roll Gear
to the Punch Gear 1.
4025-Finisher
1-11
Introduction