Knob, Shift Unit Removal - Lexmark W820 - Optra B/W Laser Printer Service Manual

Knob, Shift Unit Removal

Unit Removal
Removal
1.
Remove the Cover-Jogging.
2.
Remove the Cover-Top, Rear.
3.
Remove the Cover-Open, Front, Cover-Front and Kit Stud Cover.
4.
Remove the screw that secures to the shaft of the Frame Assembly-Roll, Shift from
the Knob, Shift Unit, and pull off the Knob, Shift Unit.
Replacement
1.
Insert the Knob, Shift Unit into the shaft of the Frame Assembly-Roll, Shift, and
secure it with a screw.
2.
Mount the Cover-Open, Front, Cover-Front and Kit Stud Cover.
3.
Mount the Cover-Top, Rear.
4.
Mount the Cover-Jogging.
4025-Finisher
Removal and Replacement Procedures
4-75