Chute Assembly-Inlet Removal
Removal
1.
2.
3.
4.
5.
6.
Replacement
1.
2.
3.
4.
5.
6.
4-48
Service Manual
Remove the Cover-Jogging.
Remove the Cover-Top, Front and Cover-Top, Rear.
Remove the Cover-Rear.
Remove the Cover-Open, Front, Cover-Front and Kit Stud Cover.
Remove two screws that secure to the Finisher from the Chute Assembly-Inlet.
Pull the Chute Assembly-Inlet off the Finisher toward the left.
Insert the Chute Assembly-Inlet from the left side of the Finisher, and align it with the
mounting position.
Secure the Chute Assembly-Inlet with two screws.
Mount the Cover-Open, Front, Cover-Front and Kit Stud Cover.
Mount the Cover-Rear.
Mount the Cover-Top, Front and Cover-Top, Rear.
Mount the Cover-Jogging.
4025-Finisher