Kit Invert Guide Removal - Lexmark W820 - Optra B/W Laser Printer Service Manual

Kit Invert Guide Removal

Removal
1.
Remove the Cover-Jogging.
2.
Remove the Cover-Top, Front and Cover-Top, Rear.
3.
Remove the Cover-Rear.
4.
Remove the Cover-Open, Front, Cover-Front and Kit Stud Cover.
5.
Remove the screw that secures the Invert Guide Assembly, Stud and Spring on the
rear side, and remove the Stud and Spring while unhooking the Spring from the
notch of the Finisher frame.
WARNING: In the following steps, the Invert Guide Assembly is not secured. Take care
not to drop or damage it.
6.
Remove the screw that secures the Invert Guide Assembly, Spring and Screw on the
front side, and remove the Stud and Spring while unhooking the Stud from the notch
of the Finisher frame.
7.
From the front side of the Finisher, remove the Invert Guide Assembly toward the
front.
4025-Finisher
Removal and Replacement Procedures
4-49