Kit Bearing Removal - Lexmark W820 - Optra B/W Laser Printer Service Manual

Kit Bearing Removal

Removal
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
4-114
Service Manual
Remove the Cover-Jogging.
Remove the Cover-Top, Front and Cover-Top, Rear.
Remove the Cover-Rear.
Remove the Cover-Open, Front, Cover-Front and Kit Stud Cover.
Remove the Tray-Lower.
On the Front of the Finisher, loosen the two screws that secure the Bracket Tray
Lower.
On the Rear of the Finisher, loosen the two screws that secure the Bracket Tray
Lower, and Remove the Bracket Tray Lower.
Remove the Holder Assembly.
Remove the screw that secures the Bearing Assembly to the Bracket Front, and
remove the Bearing Assembly. (Figure 2)
Repeat the above steps until you have removed all the Bearing Assembly.
4025-Finisher