Lexmark W820 - Optra B/W Laser Printer Service Manual page 112

Replacement
1.
2.
3.
4.
5.
6.
4-4
Service Manual
Secure the harness earth to the H-Tra with two screws.
Align the sensor with the mounting position in the H-Tra, and push it in with your
fingers to secure.
Plug the connector (P/J 260) of the H-Tra harness assembly to the sensor.
Align the tension bracket assembly with the mounting position in the H-Tra, and
secure it with two screws.
Hook the tension spring 80 to the holes in the tension bracket assembly and the
H-Tra frame.
Mount the Rear Cover.
4025-Finisher