Sensor, Exit Path Removal - Lexmark W820 - Optra B/W Laser Printer Service Manual

Sensor, Exit Path Removal

Removal
1.
2.
3.
4.
Replacement
1.
2.
3.
4.
5.
4-42
Service Manual
Remove the Cover-Jogging.
Remove the Cover-Top, Front and Cover-Top, Rear.
Unplug the connector (P/J 4) of the Harness Sensor from the Sensor, Exit Path.
Unhook the Sensor, Exit Path at four places, and remove the Sensor, Exit Path.
Align the Sensor, Exit Path with the mounting position in the Finisher, and mount the
Sensor, Exit Path.
Plug the connector (P/J 4) of the Harness Sensor to the Sensor, Exit Path.
Mount the Sensor Assembly.
Mount the Cover-Top, Front and Cover-Top, Rear.
Mount the Cover-Jogging.
4025-Finisher