Exit Roll Sensor Removal
Removal
1.
2.
3.
4.
Replacement
1.
2.
3.
4.
4-82
Service Manual
Remove the Cover-Top, Front and Cover-Top, Rear.
Remove the Sensor Assembly.
Unplug the connector (CN 43) of the Harness Motor from the Exit Roll.
Remove the screw that secures to the Exit Roll, and remove the Exit Roll.
Align the Exit Roll with the mounting position in the Compiler Guide to secure it.
Plug the connector (CN 43) of the Harness Motor to the Exit Roll.
Mount the Sensor Assembly.
Mount the Cover-Top, Front and Cover-Top, Rear.
4025-Finisher