Sensor, Exit Path Removal - Lexmark W820 - Optra B/W Laser Printer Service Manual

Sensor, Exit Path Removal

Removal
1.
Remove the Cover-Jogging.
2.
Remove the Cover-Top, Front and Cover-Top, Rear.
3.
Remove the Sensor Assembly.
4.
Unplug the connector (P/J 5) of the Harness Exit from the Sensor.
5.
Unhook the Sensor at three places, and remove the Sensor.
Replacement
1.
Align the Sensor with the mounting position in the Compiler Guide to secure it.
2.
Plug the connector (P/J 5) of the Harness Exit to the Sensor.
3.
Mount the Sensor Assembly.
4.
Mount the Cover-Top, Front and Cover-Top, Rear.
5.
Mount the Cover-Jogging.
4025-Finisher
Removal and Replacement Procedures
4-79