Blade Assembly Removal
Removal
1.
2.
Replacement
1.
2.
4-118
Service Manual
Remove the Cover-Open, Front, Cover-Front and Kit Stud Cover.
Remove two screws on the front that secure to the Finisher from the Blade
Assembly, and pull off the Blade Assembly toward the front.
Align the Blade Assembly with the mounting position so that the boss on the rear of
the Blade Assembly engages with the hole on the rear of the Finisher, and secure it
with two screws.
Mount the Cover-Open, Front, Cover-Front and Kit Stud Cover.
4025-Finisher