Kit Shift Motor Removal - Lexmark W820 - Optra B/W Laser Printer Service Manual

Kit Shift Motor Removal

Removal
1.
2.
3.
4.
5.
6.
7.
8.
9.
Replacement
1.
2.
3.
4.
5.
6.
7.
8.
4-76
Service Manual
Remove the Cover-Jogging.
Remove the Cover-Top, Front and Cover-Top, Rear.
Remove the Sensor Assembly.
Remove the Kit Shift Motor.
Remove the Kit Motor Jogging.
Unplug the connector (CN 5) of the Harness Motor from the Motor-MP5.
Remove two screws that secure to the Damper from the Finisher, and remove the
Damper together with the Gear and Motor-MP5.
Remove the E-ring that secures the Gear to the shaft of the Motor-MP5, and remove
the Gear.
Remove two screws that secure the Motor-MP5 to the Damper, and remove the
Motor-MP5.
Align the Motor-MP5 with the mounting position in the Damper, and secure it with
two screws.
Insert the Gear into the shaft of the Motor-MP5, and secure it with an E-ring.
Align the Damper, together with the Gear and Motor-MP5, with the mounting
positions in the Finisher, and secure them with two screws.
Plug the connector (CN 5) of the Harness Motor to the Motor-MP5.
Mount the Kit Motor Jogging and the Kit Shift Motor.
Mount the Sensor Assembly.
Mount the Cover-Top, Front and Cover-Top, Rear.
Mount the Cover-Jogging.
4025-Finisher