Lexmark W820 - Optra B/W Laser Printer Service Manual page 138

Replacement
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
4-30
Service Manual
Align the Switch Docking with the mounting position in the Latch Assembly, and
secure it with two screws.
Plug the connector (S1-1) of the Harness Docking to the Switch Docking.
Align the Cover Switch Docking with the mounting position in the Latch Assembly,
and secure it with three screws.
Align the Latch Assembly with the mounting position in the Finisher, and secure it
with four screws.
Align the Cover Lower Left with the mounting position in the Finisher, and secure it to
the Latch Assembly with two screws.
Secure the Cover Lower Left to the Finisher with four screws.
Align the Bracket Inlet together with the Inlet, with the mounting position in the
Finisher, and secure it with two screws.
Mount the Cover-Open, Front, Cover-Front and Kit Stud Cover.
Mount the Cover-Rear.
Mount the Cover-Top, Front.
Mount the Cover-Jogging.
4025-Finisher