Frame Post Removal - Lexmark W820 - Optra B/W Laser Printer Service Manual

Frame Post Removal

Removal
1.
2.
3.
4.
5.
6.
7.
8.
4-36
Service Manual
Place several-ply cardboards or newspapers on the floor, and carefully tumble the
Finisher from the left side.
Remove the Kit Bracket Assembly and Screw.
Remove the Cap-End.
Remove the Caster Assembly.
Remove E-rings that secure the Pin Right and Roll in the right and left sides of the
front, and remove the Pin Right and Roll.
Remove the E-ring that secures the Pin Right and Roll, and remove the Pin Right
and Roll.
Remove the E-ring that secures the Pin Left and Roll, and remove the Pin Left and
Roll.
Pull the Frame Post off the Finisher.
4025-Finisher