Kit H-Tra Bracket And Screw Removal - Lexmark W820 - Optra B/W Laser Printer Service Manual

Kit H-Tra Bracket and Screw Removal

Removal
1.
Remove the Thumbscrews that secures Docking Bracket Front to the Finisher, and
remove the Thumbscrews together with the Docking Bracket Front.
2.
For the Docking Bracket Rear and Thumbscrews on the rear side, perform the above
step in the same manner.
Replacement
1.
Align the Docking Bracket Front with the mounting position, and secure them with
the Thumbscrews.
2.
For the Docking Bracket Rear and Thumbscrews on the rear side, perform the above
step in the same manner.
4025-Finisher
Removal and Replacement Procedures
4-31