Motor Assembly-Swing Removal
Removal
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
4-104
Service Manual
Remove the Cartridge.
Remove the Bottle Assembly-Dust.
Remove the Cover-Jogging.
Remove the Cover-Top, Front and Cover-Top, Rear.
Remove the Cover-Rear.
Remove the Cover-Open, Front, Cover-Front and Kit Stud Cover.
Remove the Stapler Assembly.
Remove the Inner Cover.
Remove six screws that secure the Cover Upper Left Assembly to the Finisher
frame, and remove the Cover Upper Left Assembly.
Remove the Latch Assembly and Switch Docking.
Remove the Stapler Assembly.
Remove the Stapler harness assembly.
Unplug the connector (CN 9) of the Stapler harness assembly from the Motor
Assembly-Swing.
Remove the screw that secures the Motor Assembly-Swing, and remove the Motor
Assembly-Swing in diagonal upper rear direction.
4025-Finisher