Replacement
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
4-134
Service Manual
Insert four screws into four holes in the PWB Assembly-Main, and then insert four
spacers from the back.
Align the PWB Assembly-Main, together with four screws and spacers, with the
mounting position in the Finisher, and secure them with four screws.
Plug the connector (P/J 1A) of the Harness DC to the PWB Assembly-Main.
Plug the connector (P/J 3A) of the Harness Middle Stapler to the PWB Assembly-
Main.
Plug the connector (P/J 4A) of the Harness Motor to the PWB Assembly-Main.
Plug the connector (P/J 6A) of the Harness Motor to the PWB Assembly-Main.
Plug the connector (P/J 7A) of the Harness DC to the PWB Assembly-Main.
Plug the connector (P/J 9A) of the Harness Middle Stapler to the PWB Assembly-
Main.
Plug the connector (P/J 10A) of the Harness Sensor to the PWB Assembly-Main.
Plug the connector (P/J 11A) of the Harness H-Try to the PWB Assembly-Main.
Plug the connector (P/J 12A) of the Harness Sensor to the PWB Assembly-Main.
Plug the connector (P/J 13A) of the Harness Middle 1 to the PWB Assembly-Main.
Plug the connector (P/J 16A) of the Harness I/F to the PWB Assembly-Main.
Plug the connector (P/J 18A) of the Harness Face Up to the PWB Assembly-Main.
Mount the Cover-Rear.
Mount the Cover-Top, Rear.
Mount the Cover-Jogging.
4025-Finisher