Lexmark W820 - Optra B/W Laser Printer Service Manual page 223

Replacement
1.
Align the Bearing Assembly with the mounting position in the Bracket Front, and
secure it with a screw. (Figure 2)
2.
Repeat the above step until you have mounted all the Bearing Assembly.
3.
Mount the Holder Assembly.
4.
Align the Bracket Tray Lower, with the mounting position, and secure them with four
screws.
5.
Mount the Tray-Lower.
6.
Mount the Cover-Open, Front, Cover-Front and Kit Stud Cover.
7.
Mount the Cover-Rear.
8.
Mount the Cover-Top, Front and Cover-Top, Rear.
9.
Mount the Cover-Jogging.
4025-Finisher
Removal and Replacement Procedures
4-115