Menu: Configuring Port And Static Trunk Monitoring - HP ProCurve 2510 Management And Configuration Manual

Table of Contents

Advertisement

Monitoring and Analyzing Switch Operation
Port and Static Trunk Monitoring Features
Figure B-19. The Default Network Monitoring Configuration Screen
B-24

Menu: Configuring Port and Static Trunk Monitoring

This procedure describes configuring the switch for monitoring when moni-
toring is disabled. (If monitoring has already been enabled, the screens will
appear differently than shown in this procedure.)
1.
From the Console Main Menu, select:
2. Switch Configuration...
3. Network Monitoring Port
2.
In the Actions menu, press
3.
If monitoring is currently disabled (the default) then enable it by pressing
the Space bar (or
4.
Press the down arrow key to display a screen similar to the following and
move the cursor to the Monitoring Port parameter.
(for Edit).
[E]
) to select Yes.
[Y]
Enable monitoring
by setting this
parameter to "Yes".

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 2510-24Procurve 2510-48

Table of Contents