Timer Configuration Across All Vsans - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 68 Troubleshooting Your Fabric
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
The fabric stability TOV (F_S_TOV) constant cannot be configured.
Note

Timer Configuration Across All VSANs

You can modify Fibre Channel protocol related timer values for the switch.
Caution The D_S_TOV, E_D_TOV, and R_A_ TOV values cannot be globally changed unless all VSANs in the
switch are suspended.
To configure timeouts using Fabric Manager, follow these steps:
Step 1 Select SAN in the Logical Domains pane to include all VSANs.
Step 2 Expand Switches, expand FC Services and select Timers & Policies in the Physical Attributes pane.
You see the timers for switches in the Information pane.
Click Change Timeouts to configure the time-out values.
Step 3
You see the Change Timeouts dialog box shown in
Figure 68-12
Step 4 Indicate values for R_A_TOV (Resource Allocation Time Out Value), D_S_TOV (Distributed Services
Time Out Value), and E_D_TOV (Error Detect Time Out Value).
Step 5 Click Apply.
Step 6 Click Close to close the dialog box.
To configure timer policies in Device Manager, follow these steps:
Step 1 Choose FC > Advanced > Timers/Policies.
You see timer policies for a single switch in the dialog box shown in
OL-8007-10, Cisco MDS SAN-OS Release 3.x
Change Timeouts Dialog Box
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Fibre Channel Time Out Values
Figure 68-12.
Figure 68-13.
68-15